Shasta Kennemer asked 3 weeks ago
Ghost Immobiliser Installation
Guard your precious possessions from thieves by adding a ghost ii immobiliser immobiliser. Our TASSA verified system protects vehicles from hacking, key cloning, and vehicle immobiliser bypass.
The system is hidden in your vehicles wiring loom so it’s completely invisible to anyone looking. It is created by generating a pin code push sequence that is pushed through existing buttons on the steering wheel, door cards and centre console.
No circuit cuts
It’s not a surprise that people are keen to secure the vehicle they’ve put so much effort into buying. However, traditional security devices like alarms and wheel locks could easily be cut off or bypassed by thieves. Ghost immobilisers, on the other hand, is a highly effective solution that works silently and isn’t easily recognized by modern day thieves.
A ghost immobiliser is also known as a hidden device, is a device that connects with your vehicle’s data network CAN to shut off the engine. It does this without radio frequencies or key fobs. It communicates with the ECU of your vehicle via buttons on the steering wheel, dash and door panels. This creates a unique pincode that is only available to you. The code can be changed at any time and can be up to 20 digits in length, based on what you prefer. It also has an emergency code you can use in the event of forgetting your PIN.
The ghost immobiliser could also be used to prevent relay boxes from transmitting the car key’s signal inside your home, which will open the doors and begin the vehicle. It can also block high-tech methods to steal your vehicle, like OBD port hacking. The device is tiny and weatherproof, meaning it’s hard to spot and is also difficult to alter with.
The ghost immobiliser comes with a further advantage: it is able to be installed in your vehicle without leaving any permanent marks. This is ideal for people who plan to sell their car in the near future. It’s also a lot faster and easier to install than a factory-fitted system.
The autowatch ghost immobiliser fitting Ghost is a groundbreaking next-generation device that prevents vehicles that are stolen through contactless by connecting to the vehicle’s CAN data network and using existing buttons to generate a unique PIN. It is a discreet device that can be installed with no wires cut and does not require additional key fobs. It is also connected to the vehicle’s original ECU and prevents thieves from gaining access by using new keys or replacing the ECU with the use of a “relay”. This system is TASSA-certified and is able to be linked to an International Security Register. Owners will have peace of mind, knowing that their vehicle is secured from theft.
No scanning with RF
If you have invested lots of time and money into the customisation of your vehicle, you’ll want to safeguard it from theft. Installing an immobiliser is one of the most effective ways to avoid theft. It will prevent your vehicle from starting until you input the unique code. By using the buttons on your steering wheel as well as the dashboard, you can generate a PIN up to 20 digits long that is only known to you, and ensure that only you have access to your vehicle. It is also possible to create a service and valet mode that allows you to start your car temporarily without entering the PIN code. This will permit your technician to work on your car without your presence. This is a great option for Ghost immobiliser installation people who want to save time and simplify their lives.
A ghost immobiliser is a new generation device that connects to your vehicle’s CAN data network, and uses the buttons on the dashboard and steering wheel to program a personal PIN code. It is designed to blend into with the rest of your vehicle, since it doesn’t emit any sound or light indicator. It can be put in anywhere on your vehicle, without impacting the appearance of your vehicle.
This stealthy device is TASSA approved and could reduce the cost of insurance. It also has an ability to track your vehicle, which can locate your vehicle even if it’s been stolen. This is useful if you own a unique or expensive vehicle that you’ve invested many hours customizing.
Autowatch Ghost, in conjunction with the iPhone app, allows you to remotely start your vehicle when you’ve lost your PIN number or are unable to access your vehicle. This feature is perfect for those who need to run errands or drop off your kids and do not want to let someone else drive your vehicle. It’s also useful if you need to take your vehicle in for servicing or repair.
The Ghost has the advantage that it does not transmit or detect radio frequency, so it is undetectable by thieves who use RF scanning and code grabbing technology. It can also protect your vehicle from key duplicates, ECU swapping and other typical methods of theft.
There is no key to cloning
Ghost immobilisers can be an excellent method to protect top-end vehicles and stop key duplicates. They stop your car from starting until an additional PIN code is entered in conjunction with the standard key fob. This makes it very difficult for thieves to steal your vehicle, and may discourage them from attempting it in the first place. This is a particularly good idea if you’ve spent a lot of time and money in personalising your vehicle or own a unique or expensive model.
These immobilisers connect to the vehicle’s onboard CAN network and are completely hidden, meaning that there is no visible sign of its presence within the vehicle. The device is also difficult to detect using radio frequency scanning technology or code grabbing. This means that a burglar will have to spend much longer in order to successfully take your car.
To bypass the system thieves must know the unique pin code and the location of the Ghost. But, the pin code is specific to you and may be changed as many times as you’d like. The pin you select is simple to remember, however, it is mathematically impossible for anyone else to decipher. The engineer will also provide an emergency pin code in the event that you forget the pin.
The Ghost CAN Bus immobiliser could be easily mounted anywhere on your vehicle. It works with all vehicles and is completely customizable to match the appearance of your vehicle. It is also simple to use and cost-effective. You can even transfer the device to a different vehicle if you change cars during the lifetime of ownership, providing that the new vehicle is compatible with it.
The CAN bus is compatible with other security features. It could, for instance detect damage to the vehicle and notify the owner. It could also stop the engine in the event that the car is damaged. The system also protects your vehicle from key cloning and hacking. It also detects vibrations or contact with the vehicle. Additionally, it will alert the owner if the vehicle has been moved.
No OBD port hacking
Ghost is a hidden device that is connected to the CAN data network of your vehicle. This prevents a thief trying to hack into your vehicle to disable your alarm, deactivate your key fob and make new keys. This technology is an improvement over the methods that were employed by thieves to steal vehicles in the past. The CAN data networks also means that your system will not be affected when you disconnect or change your battery.
The Autowatch Ghost is the world’s first aftermarket CAN bus non-detectable immobiliser that protects against key-cloning, hacking, and replica car theft. It does not utilize LED indicators or key-fobs. Instead, it uses the buttons on your steering wheel, console and door panels.
Modern thieves use diagnostics to detect circuit breaks in your vehicle. They can bypass immobilisers that require a large amount of wiring or are integrated into the wiring. The Ghost is weatherproof and Ghost immobiliser installation does not require any additional wiring. It is not identified by diagnostic tools that are professional. It can be installed even on vehicles equipped with anti-theft devices.
A Ghost immobiliser also has a significant benefit: your vehicle can only be started by someone who knows your PIN and physically has access to your vehicle. This is a major advantage over traditional security systems that can be tampered with using simple cable tampering, a screwdriver or an universal remote controller.
You can easily reset your PIN if forget it using the emergency PIN reset feature on a computer or mobile phone. This is useful if want to start your vehicle after it has been left in a garage or by using the valet parking service.
The Autowatch Ghost 2 is the latest generation of the product and is approved for insurance by TASSA when installed by one of our authorised installers. It comes with a QR fingerprint system to identify specific parts, which allows for the return of stolen items if they are found. It can also be set to’service mode’, which allows the engine to start when your vehicle is in a garage, or if you have valet parking, however, you must enter your PIN code again to exit the car.